Categories

System malfunctions and false alarms can be aggravating, and even worse, might prevent your home security system from working how it should. Fortunately, most troubles, from false alarms to dead batteries, are straightforward to correct. Check out our tips for troubleshooting your home alarm system in Lakeland. We’ll help keep your household shielded and your system operating smoothly.

Test Your Home Security System In Lakeland

One effective way to troubleshoot your property’s defense is to test it! Newer systems permit you to put them in test mode to prevent you from triggering an emergency response. Once you’re in test mode, do the following:

• Activate your system as you typically would when heading out.
• Open a window or door that has a contact sensor, or try to trigger something else. Close the door or window once you’re done so it doesn’t trigger the alarm as you get out of test mode.
• Let the alarm sound for 60 seconds to ensure communications with the security company and to make an entry in the alarm system log.
• Proceed to test devices as you wish
• Check the systems’s activity log to confirm functionality.

No need to worry, monitoring professionals will be able to see that your alarm system is involved in a test. Be sure to turn test mode off when done. It’s smart to test once a month or anytime you adjust your home’s internet or phone provider.

Inspect The Positioning And State Of Motion Sensors

Although an integral part of your alarm system, motion sensors are prone to false alarms. Do your part to prevent them with some easy troubleshooting.

• Perform a visual inspection. Is there anything that could move within the sensor’s detection range, like a window treatment caught in a breeze?
• Is the sensor clean? Cobwebs, dirt, and debris can result in poor performance. Make sure the sensor is clean.
• Does the motion detector have pet immunity you can turn on? Some can be programmed to disregard pets up to 100 pounds.
• When was the battery replaced? A nearly depleted battery might impact performance or lead to false alarms.
• Is the sensor pointing toward a source of heat? Too much heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One of the great things about the latest home security systems is that they’ll notify you when batteries are getting low. If your system uses a mobile app or control panel, you’ll usually find messages there. Depending on your system, you may detect an intermittent beep when batteries are running out. 

Contact sensors, motion detectors, smoke detectors, and other wireless devices have batteries that need to be replaced every 1 to 2 years. It’s wise to keep batteries ready and create a replacement schedule. Many systems also come with a rechargeable backup battery for the central control panel. This backup battery helps keep your system running if your power goes out and should recharge once power is back online. If it fails to recharge, you will have to replace it.

Troubleshooting Is Easy With ADT Home Security In Lakeland 

As the leading name in home security, ADT creates systems that provide unsurpassed protection and functionality. Switching to test mode is easy through the ADT+ app or MyADT.com, and you’ll always get notifications when a battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your Lakeland home. Place a call to (863) 225-1652 or complete our form today!